Fast dry
Fast Dry to touch and handle
Smooth layout with low orange peel for increased DOI,
Available in white and light grey.
KIC Custom Formulated Products / Tie coat & industrial primer
KIC Universal Primer is a fast dry, single component, corrosion inhibitive, modified alkyd metal primer that can be top coated with epoxies, polyurethanes, acrylic and air dry coatings. KIC Universal Primer can also be used as a dry fall primer/finish.

KIC Universal Primer
Fast Dry to touch and handle
Smooth layout with low orange peel for increased DOI,
Available in white and light grey.
Good corrosion protection for moderate corrosion environments with the appropriate topcoat.
Meets SSPC Paint #15 and #25 and MPI #79.
Low V.O.C./No H.A.P.s
Very good dry fall properties to help control overspray in the appropriate environment.
Can be used as a tie coat over solvent sensitive paints before the application of hot solvent coatings.
Remove all loose, peeling, or blistered paints, and any other surface contaminants. Make sure surface is clean, sound, dry and dull. A test patch with KIC Universal Primer should be applied to the existing paint to check for compatibility.
Immersion service-Not recommended.
CONCRETE: Not recommended
50% R.H. @ 3 MILS DFT @ 70°F
24 hrs. minimum recoat time when top coating with epoxies, polyurethanes or other "hot" solvent topcoats.
If you cannot recoat within the maximum recoat window, the primer must be sanded with 180-320 grit sandpaper to provide a uniformly dull and scratched surface to assure proper topcoat adhesion.
Contact KIC for the current technical data sheet, system requirements and test documentation before specifying a product.